Local Reviews
for Reynoldsburg, OH
Powered by Nearby Nowgreat service
Natasha - Reynoldsburg, OH
The best company and service techicians
Excellent Service
Larry - Reynoldsburg, OH
Install technicians were on-time, professional and did a great job putting in a new AC unit. Also, I am amazed how well my place looked when they were finished. I highly recommend Five Star for their excellent and professional service.
Solid Company
Annette - Reynoldsburg, OH
This company always does an excellent job. Two minor issues with the AC check during the first week in June: 1. It took nearly two months from the time I called to get on the schedule in early June 2. Apparently the humidifier attached to the unit was not serviced; it was still operating in the winter mode when I checked after the service guy left. Things happen and I will still continue to use this company with confidence.
great service,checked everything out and took his time to explain everything, Thats Big
Rocky - Reynoldsburg, OH
Very satisfied
Craig - Reynoldsburg, OH
I would request Jake for all my properties in the future. Thanks
Good Service technician capable
Richard - Reynoldsburg, OH
Technician did good job
Excellent service
Kay - Reynoldsburg, OH
Pickerington Heating & Cooling had someone available to come the same evening I called, however the problem wasn’t that serious so I scheduled for the next day. The technician (Beron) was available earlier than scheduled and called to see if an earlier time would work. I wasn’t home so he suggested I call as soon as I was available, which I did and he arrived within 10 minutes and reset my thermostat for me. Beron is efficient, polite and seems to enjoy his job. I appreciate the continued good service from a Pickerington Heating & Cooling.
Great service, friendly, thorough
Diana - Reynoldsburg, OH
Great Service
Stacy - Reynoldsburg, OH
Very helpful, polite
Quick and professional
Don - Reynoldsburg, OH
Brandon M.
I went to the customer's home to turn the gas back on. I checked the furnace and checked to see a contact in the combustion, and I found that I was still over 1000ppm Co on the Flue. I found the gas valve faulty and will need to be replaced. After it is replaced, I will need to run another combustion test.
Brandon M.
Upon arrival I went through tune-up checklist and confirmed that system is working within manufacturers specifications. I was performing my combustion test found Over 2000 ppm of CO in the flu and I turned the gas off on the furnace. i notified customer that the flu pipe stack needs to be inspected and cleaned checked gas pressure gas pressure was normal. Recommended pro chimney sweep to customer to come out and have the stack inspected and cleaned told him to notify us after he has inspected and cleaned out and will come back and turn the gas back on.
Aaron B.
Upon arrival I went through tune-up checklist and confirmed that system is working within manufacturers specifications. The system heating properly upon departure.
Aaron B.
I completed a heating tune up on a Goodman gas furnace. I visually inspected the unit and checked the voltages, amps and pressures. I also completed combustion analysis. I then cycled and monitored system and it is operating normally at this time.
Aaron B.
I completed a heating tune up on a Carrier gas furnace. I visually inspected the unit. Checked voltages, amps and pressures. Completed combustion analysis. Cycled and monitored system. Operating normally at this time.
Brandon M.
I completed a heating tune up on a Goodman gas furnace. I visually inspected the unit. Checked voltages, amps and pressures. Completed combustion analysis. Cycled and monitored system. Operating normally at this time.
Brandon M.
I performed a diagnostic service call. Upon arrival, customer stated that when they turn the heat on their blower motor was not blowing out any air but in cool mode it was. Checked flame sensor - found flame sensor had quite a bit of debris buildup on it cleaned off. Flame sensor reinstalled. System is running and operating normally.
Brandon M.
I completed a diagnostic. Upon arrival customer stated furnace was not eating their home would not grow above 69° in the house. found gas valve would not open. I diagnosed gas valve to be faulty.
Brandon M.
I completed a heating tune up on a Carrier gas furnace. I visually inspected the unit. Checked voltages, amps and pressures. Completed combustion analysis. Cycled and monitored system. Operating normally at this time.
Aaron B.
I completed a heating tune up on a Trane gas furnace. I visually inspected the unit. Checked voltages, amps and pressures. Completed combustion analysis. Cycled and monitored system. Operating normally at this time. I completed spring tune up on a Trane air conditioner. I visually inspected the furnace. I inspected the evaporator coil. I checked the temperature difference across the coil. Checked voltage and amps. Inspected heat pump. Checked refrigerant charge, voltages and amps. I rinsed the condenser coils with water. Cycled and monitored the system. Operating normally at this time.
