Local Reviews
for Blacklick, OH


Isaiah C.

Isaiah C.

I delivered portable heaters to the customer as they had to wait a day or two until their new system could be installed.

Near Beardsley Ave, Blacklick, OH 43004
Isaiah C.

Isaiah C.

I found the system is lacking air flow and provided the customer with some options of what they could do as well as changes we could make to the system. I also provided a quote for an I wave air purifier after the customer asked for one. System is operational upon departure.

Near Chapel Stone Rd, Blacklick, OH 43004
Blacklick, OH - I found the system is lacking air flow and provided the customer with some options of what they could do as well as changes we could make to the system. I also provided a quote for an I wave air purifier after the customer asked for one. System is operational upon departure.
Isaiah C.

Isaiah C.

I installed the customer provided Ecobee thermostat. Once installed, I cycled the system to ensure everything was working. System is operational upon departure.

Near Maple Leaf Cir, Blacklick, OH 43004
Blacklick, OH - I installed the customer provided Ecobee thermostat. Once installed, I cycled the system to ensure everything was working. System is operational upon departure.
Isaiah C.

Isaiah C.

I found the system was lacking proper air flow and the filter size the customer installs needs to increase. I provided a quote per customer's request of an I wave air purifier, proper filters, and labor. Customer will contact us when ready. System is operational upon departure.

Near Babbitt Rd, Blacklick, OH 43004
Blacklick, OH - I found the system was lacking proper air flow and the filter size the customer installs needs to increase. I provided a quote per customer's request of an I wave air purifier, proper filters, and labor. Customer will contact us when ready. System is operational upon departure.
Isaiah C.

Isaiah C.

While performing a tune up, I found the inducer motor is going to die soon. I informed the customer of my findings and presented them with repair and replace options to consider. System is operational upon departure.

Near Walker Springs Dr, Blacklick, OH 43004
Blacklick, OH - While performing a tune up, I found the inducer motor is going to die soon. I informed the customer of my findings and presented them with repair and replace options to consider. System is operational upon departure.
Isaiah C.

Isaiah C.

After performing diagnostic tests, I found the EcoBee thermostat was faulty. Customer will be contacting the company to go through the warranty process. System not operating at departure due to issues with thermostat.

Near Maple Leaf Cir, Blacklick, OH 43004
Blacklick, OH - After performing diagnostic tests, I found the EcoBee thermostat was faulty. Customer will be contacting the company to go through the warranty process. System not operating at departure due to issues with thermostat.
Isaiah C.

Isaiah C.

I performed a tune up on a Trane gas furnace. Everything checked out as it should.

Near Lupine Dr, Blacklick, OH 43004
Blacklick, OH - I performed a tune up on a Trane gas furnace. Everything checked out as it should.
Isaiah C.

Isaiah C.

I arrived on site changed out a Lennox 80% inducer motor, cycled on, replaced rusted screws on exhaust pipe. System is fully operational.. removed bad filter and informed customer.

Near Beardsley Ave, Blacklick, OH 43004
Blacklick, OH - I arrived on site changed out a Lennox 80% inducer motor, cycled on, replaced rusted screws on exhaust pipe. System is fully operational.. removed bad filter and informed customer.
Isaiah C.

Isaiah C.

I performed a diagnostic on a Lennox 80% gas furnace. I found the inducer motor humming. I tried spinning the motor with my hands and it would start. Tested voltage coming to the motor 120v correctly. Re wired cycled on tried to spin it and it ran for a couple mins but wouldn’t make enough pressure to close switch. The motor has failed mechanically at this time and needs to be replaced.

Near Beardsley Ave, Blacklick, OH 43004
Blacklick, OH - I performed a diagnostic on a Lennox 80% gas furnace. I found the inducer motor humming. I tried spinning the motor with my hands and it would start. Tested voltage coming to the motor 120v correctly. Re wired cycled on tried to spin it and it ran for a couple mins but wouldn’t make enough pressure to close switch. The motor has failed mechanically at this time and needs to be replaced.
Lucas M.

Lucas M.

I quote customer price on Carrier 96% Two-Stage 80,000 BTU Gas Furnace.

Near Elgin Trail Dr, Blacklick, OH 43004
Blacklick, OH - I quote customer price on Carrier 96% Two-Stage 80,000 BTU Gas Furnace.